Model: iPF680
Class: 24-inch
Ink Type: Dye and pigment reactive ink: BK, MBK, C, M, Y
Maximum Print Resolution: 2,400 x 1,200 dpi
Installation: User installation
Printer Stand: Type: Assembly type (The printer stand is included with it in the same package.)
Dimensions, Weight (Net) W x D x H (mm), (kg)
Main unit + Printer Stand (with a basket open): 997 (W) x 887 (D) x 1,062 (H) mm (when with basket open) 997 (W) x 1,100 (D)x 1,062 (H) mm (when a basket is at the extended position for flatbed stacking) Weight: 56.7kg (roll holder included, no inks, no print heads)
Power Supply: Input Power: AC 100 - 240 V (50 - 60 Hz)
Power Consumption: Operation: 140 W or less
Standby power consumption (at the low power mode): 100V - 120V: 5 W or less, 220V - 240V: 5 W or less
Power off (standby): 0.5 W or less
Operational Environment: Temperature: 15 - 30 degrees celcius, Humidity: 10 - 80% (Condensation free)
Acoustic Noise
Acoustic pressure: Operation: approx. 47 dB (A) (Plain paper, Standard printing mode, Line Drawing/Text) Standby: 35 dB (A) or less Measured in the above conditions, based on ISO 7779
Acoustic power (LWAd): Operation: approx. 6.4 Bels (Plain paper, standard printing mode, Line Drawing/Text) Measured in the above conditions, based on ISO 7779
Minimal Line Width: 0.02 mm
Line Accuracy: +/-0.1% or less
Detector and Adjustment
Registration adjustment: Automatic/Manual
Banding adjustment (Line Feed adjustment): Automatic/Manual
Line length adjustment: Manual
Head slant adjustment: Automatic/Manual
Colour calibration: No
Head gap adjustment: Automatic/Manual (6 levels)
Non-firing detection: Yes
Non-firing compensation: Yes
Roll media remaining detection function: Yes
Memory
Standard memory: 256MB
Expansion slot: None
Firmware Languages
Printer language: GARO (Graphic Arts language with Raster Operations), HP-GL/2, HP RTL
Job control: CPCA
Status reply: CPCA, SNMP-MIB (Standard MIB, Canon-MIB)
Type: Flash ROM
Update: Updated from USB, 1394, Ethernet Port (Utility use)
Operation Panel
Display: Large LCD: 160 x 128 dots; Key x 13, LED x 5
Language on operation panel: US-English, Japanese
Languages: US-English, French, German, Italian, Spanish, Chinese (simplified), Korean, Russian, Brazilian portuguese language, Japanese (Kanji)
Hard Disk Drive: None
Interface
USB Type: Built-in
USB Mode: Full Speed (12 Mbit/sec), High Speed (480 Mbit/sec), Bulk transfer
USB Connector type: Series B (4 pins)
Ethernet Type: Built-in
Ethernet Standard: IEEE802.3 10base-T, IEEE802.3u 100base-TX/Auto-negotiation, IEEE802.3ab 1000base-T/Auto-negotiation, IEEE 802.3x Full duplex, IEEE802.3az EEE
Ethernet Protocol: SNMP (Canon-MIB supported), HTTP, TCP/IP (IPv4/IPv6)
Expansion slot: None
Print Head: Model PF-04
Type: Bubble-jet on demand
Head configuration:
6 colours integrated type (6 chips per print head x 1 print head)
Nozzle pitch: 1,200 dpi x 2
Nozzle per chip: MBK: 5, 120 nozzles, each other colour: 2,560 nozzles
Droplet size: 4 pl (per colour)
Head replacement: User replacement
Ink Tank:
Model
MBK/BK/C/M/Y - PFI107(130ml) and PFI207(300ml)
Supply
Tubing system (supplies ink from independent ink tanks set in the printer through tubes)
Colours
MBK, BK, C, M, Y
Capacity
Bundled starter ink: 90 ml (only MBK 130ml), sales ink: 130 ml / 300 ml
Level detection
Detected by dot count and electrode (Empty)
Smart chip
Each ink tank is equipped with EEPROM which stores its ink level
Cutter:
Type
Standard: Automatic horizontal cutting (rotary cutter)
Cutter durability (cuts)
Adhesive media: 25,000 cuts, Non-adhesive media: 100,000 cuts
Replacement: Service replacement
Media Handling
Roll paper
One Roll, top loading, front output
Cut sheet
Top-feeding, front output (Manual feed using media locking lever)
Paper path switch (roll/cut sheet)
Manually switchable by user
Delivery direction
Face-up, front side
Maximum stacking number of delivered prints
-1 sheet: In case of the regular basket position
-Approx. 20 sheets: In case the basket is at the extended positions. (Except for the cases where delivered prints are rolled in because of environmental impact and media curls.)
Usage environment of the extended basket / image
At normal temperature and normal humidity (15 degrees celcius 30% - 30 degrees celcius 60%) / Image: Line drawing (images equivalent to the Cottage.)
Sizes of media stackable on the extended basket
Extended position A: A1 portrait or Width 24" x Length 36"
Extended position B (Flatbed stacking): A2 landscape or Width 24" x Length 18"
Media Size: Roll paper (width)
ISO: A3, A2, A2+, A1
JIS: B4, B2
ARCH: 24"
Others: 10", 14", 16", 17", Banners (300 mm)
Media Size: Cut sheet
ISO: A4, A3, A3+, A2, A2+, A1, B4, B3, B2
DIN: C4, C3, C2
JIS: B4, B3, B2
ANSI: 8.5 x 11", 8.5 x 14", 11 x 17", 13 x 19", 17 x 22", 22 x 34"
ARCH: 9 x 12", 12 x 18", 18 x 24", 24 x 36"
Photo: 20 x 24", 18 x 22", 14 x 17", 12 x 16", 10 x 12", 10 x 15", 16 x 20" (US Photo size)
Poster: 20 x 30", 300 x 900 mm
Others: 13 x 22"
Media Thickness
Roll paper Cut sheet: 0.07 - 0.8 mm
Max Outside Dia. Of Roll Paper
Roll paper: 150 mm
Media Core Size
Internal diameter of roll core: 2" / 3"
Media Width
Roll paper: 254 (10") - 609.6 (24") mm
Cut sheet: 203.2 (8") - 609.6 (24") mm
Min Regular Format Size (Vertical)
Roll paper: 203.2 mm (8")
Cut sheet: 279.4 mm (11"): Letter size (long side)
Max Printable Paper Length
Roll paper: 18 m
Cut sheet: 1.6 m
Margins: Recmd area
Roll paper: Top: 20mm, Bottom: 5mm, Left and Right: 5mm
Cut sheet: Top: 20mm, Bottom: 23mm, Left and Right: 5mm
Margins: Printable area
Roll paper: Top: 3mm, Bottom: 3mm, Left and Right: 3mm
Roll paper (borderless printing): Top: 0mm, Bottom: 0mm, Left and Right: 0mm
Cut sheet: Top: 3mm, Bottom: 23mm, Left and Right: 3mm
Borderless Printing
Media Width: 10" (254mm), B4 (257mm), A3 (297mm), Banner (300mm), 14" (356mm), A2 (420mm), A2+/17" (432mm), B2 (515mm), A1 (594mm), 24" (610mm)
Regulations
Electrical safety regulations
Australia: RCM
New Zealand: None
Electromagnetic interface regulations
Australia: RCM
New Zealand: RCM
Note: This machine satisfies the test requirements for powder dust, ozone, TVOC, styrene and benzene emissions. Further information in relation to emissions data, return of spare parts or consumables or any specific further information regarding this product can be made available upon request from Technical Services on 0800 222 666 (NZ) or
Main Unit with Stand & Basket
2" Roll Holder with 3" Core Adapters
1 Print Head
1 Maintenance Cartridge, (installed)
5 Starter Ink Tanks (C, M, Y, BK, MBK)
A2 Cut Sheet Heavyweight Coated Paper (5 pieces)
Ethernet Card (built in)
USB 2.0 High Speed Interface
User Manual CD
Quick Setup Guide (Poster)
Printer Reference Guide (Booklet)
Power Cord
One Year Warranty Card
Registration Card
PosterArtist Lite Application CD
The iPF680 has been designed to fit comfortably into any CAD/GIS environment. A compact, slim-line design and front-access paper system means you can install the printer wherever you like – even flush against a wall. All operation including ink tank changing is carried out from the front, so you never need to disrupt your office no matter where you decide to place the printer.
A large LCD control panel featuring graphic animations ensures it’s quick and easy to get to grips with. Prints are automatically stacked and can be collected from a high capacity basket to prevent damage and there’s even a handy print timer to keep you abreast of how long a job will take to complete.
Expect exceptional productivity with draft A1 prints available in just 24 seconds. Canon’s L-COA image processing technology and Gigabit Ethernet compatibility ensure stunning high-speed reproductions on everything from architectural plans to geographic information.
“Hot-swap” ink tanks allow ink cartridges to be replaced during printing for maximum productivity.
A built in accounting function allows accurate tracking of the cost per print and the overall cost of your printer and enables you to view the data through the printer driver, or export it to a CSV file for use in your own files or systems. An Economy mode can be selected which uses less ink - ideal when printing draft documents. Furthermore, Canon’s eMaintenance software automatically detects and manages mechanical problems and low ink levels, linking directly to a Canon service centre for maximum uptime.
Canon’s 5-colour dye-and-pigment reactive ink system produces vivid colours and the sharpest, thinnest lines and the new magenta ink makes the red gamut even better. With a range accuracy of +/- 0.1% as well as a minimum line width of 0.02mm, precision is guaranteed. Images are rendered at 2,400 x 1200 dpi for maximum impact, thanks to super-fine print heads using 15,360 nozzles.
The iPF680 is compatible with HP-GL/2 and HP-RTL, including the ability to set palette and pen settings, for the most demanding CAD workflows. As well as an HDI driver for AutoCAD and for Microsoft Office users, there is a plug-in to print in Word, Excel and PowerPoint directly from the application.
Space saving, compact design
Manage costs & track ROI with accounting software
User friendly front access
High productivity incl. “Hot swap” ink tanks
Exceptional quality & accuracy
HP GL/2 & HP-RTL compatible